·设为首页  ·加入收藏
 不锈钢表面处理
 200系列钝化液
 400系列钝化液
 HJ101不锈钢酸洗钝化膏
 HJ102不锈钢酸洗钝化液
 HJ103不锈钢热压封头酸洗钝化膏
 HJ104不锈钢焊道快速净
 HJ105金属除锈光亮膏
 HJ106不锈钢钝化液
 HJ107 电解抛光液
 不锈钢分析检测药水
 不锈钢光亮清洁水
 不锈钢光亮清洁油
 不锈钢护膜液
 不锈钢快速清洗剂
 水性护膜液
 钛合金清洗钝化膏
 HJ108不锈钢酸洗钝化膏
 蓝点检测液
 铝及铝合金表面处理
 金属表面除蜡清洗液
 铜表面材料剂
 焊接抛光助剂
 护膜剂
 磷化液
 除锈剂
 除油剂
 脱膜剂
 脱漆剂
 防锈剂
 其它
 碳钢表面处理
  地址:安徽省天长市园林路园林街道10号信箱
客  服(QQ):446292566
技术支持(QQ):369142678
电 话:086-0550-7043428
传 真:086-0550-7026786
手 机:13955076287
联系人:徐成相

                                      

               不锈钢酸洗钝化膏  HJ-108
   
    具有除油脱脂、酸洗****、钝化到位同步进行的三重功效,突破先除油脱脂再酸洗和钝化的传统工艺方法。清除氧化物、钝化表面、去除油脂效果超过同类产品。操作工艺简单,施工方便,省时省力,并可因室外强光下操作晒干后花斑现象,气味小,适用于容器内壁使用。
    用于不锈钢化工设备、储罐、大型不锈钢设备等相关不锈钢制品表面。油污、氧化物清除并使其钝化处理后表面光洁平滑,银亮有光,稳定型强,耐腐蚀性明显提高,延长设备使用寿命。
   使用前将焊缝焊渣清理干净,再将本膏涂刷于待处理表面。清洗不锈钢表面和焊缝,涂本膏1-2毫米(焊缝处涂层略厚),保留1小时以上即可以清洗。清理焊接部位时,严重热影响区用百洁布擦洗,表面油污用棉纱擦洗,再用高压水冲洗,最后用清水冲洗干净。不要在强光高温的室外涂刷,防止钝化膏干掉,影响效果
 
The stainless steel is sour to wash the bluntness to turn the cream   HJ-108
     Have degrease in addition to the oil, sour wash thoroughly, the bluntness turns to carry on synchronously of three heavy effects, break to degrease in addition to the oil first then sour wash and traditional craft method that bluntness turn.The clearance oxide, bluntness turns the surface and does away with the grease result to exceed the of the same kind product.Operate the craft in brief, start construction convenience, save time labor-saving, and can because of the outdoors strong light next the operation spends the spot phenomenon after dry in the sun, the smell is small, being applicable to the wall inside the container to use.
     Used for the stainless steel chemical engineering equipments and keep the related stainless steels, this article improved the worker,s operation environment thoroughly.Being applicable to the well ventilated condition of the operation environment to be subjected to restriction specially or stainless steel containers in a state of semi-enclosed internal surface processing,simultaneity also be applicable to the polishing mirror panel,will not produce skewbald. which can quickly clear the welding cicatrice and oxidative horizon on the stainless surface caused by weld and gas skiving.Also have a good effect in clearing the oilstain and rust and will form a passive film on the workpiece after using the product.Especially suitable for the large article which is difficult to dipin.use in convenience.
      Brushing in surface and welded joint evenly, draw this cream 1-2 millimeter,thicker coating for thicker oxidation. Firstly remove oil dirt for oxidation oil. Scrub away corrosion and oxidation with cotton waste, cotton yarn, the 60 minuteses of rags in, then wash it with water.Prolong proper time for higher passivation demand.
 
版权所有:天长市华锦防腐清洗材料厂  技术支持:网络
地址:安徽省天长市园林路园林街道10号信箱  邮编:239300
电话:086-0550-7043428   传真:086-0550-7026786
手机:13955076287  联系人:徐成相
澳门老虎机网上_天长市华锦防腐清洗材料厂